G'morning all, Does anyone have a CodeGen for a Bystar? Or even a break down of the G&M code? It seems that the Bystar "programming manual" provides reference to Bysoft and doesn't get into the nuts and bolts of the code.
John Chambers wrote: > > The easy answer: Get Bysoft, and a Bystronics laser. Yep, great machine. The software is good, too, but offers little options. I have the need to do corner slowdowns and haven't found a way through Bysoft to do so. I've also had a hard time finding out how to change parameters within the program - on the fly - for these corners. With other lasers I've programmed you could (within the program) ... - Set pierce parameters up (pulse, power, hertz, %, etc.). - Pop the hole. - Set cut parameters (continuous, fast feed, etc.). - Cut. - Reset parameters before a sharp corner (back to pulse, slower feed, etc.). - Negotiate the corner. - Back to fast cut, and so forth. There's a bunch of other stuff I'd like to try with this machine, but the lack of information on G code details is kind of stifling. Anyone? Thanks. - John Gent ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
