Sorry about that. Firewalls don't like .bas extension. Attached is the same file with the extension changed to txt. Download the file and change the extension back to bas.
Note: I have NT on my machine and NT has Qbasic available. If you are running 2000 or XP I don't know whether it will work or not. It may have to be compiled before you can use it. Anyone have the answer to this. Bill Wepking Landis Gardner -----Original Message----- From: Michael Senack [mailto:[EMAIL PROTECTED] Sent: Thursday, November 20, 2003 8:12 AM To: Wepking, Bill W. Subject: RE: [mfg-smartcam] Tape 2 MCL Unfortunately your attachment was quarantined by out virus software. Could you send the file without an extension on it, and when I receive it I'll rename it with the extension. If you have time to do this, and resend the file, could you please let me know what the extension is. What Basic are you referring to in your comment "if you have basic available" because, I have access to good old GWBasic and a newer Power Basic. Thanks. Regards, Michael Senack -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wepking, Bill W. Sent: Wednesday, November 19, 2003 3:04 PM To: Mfg-Smartcam (E-mail) Subject: [mfg-smartcam] Tape 2 MCL Group, The subject of tape 2 shape comes up every so often. We used TTS for some time but I felt it was very limited so I wrote a basic program that converts tape files to macro (MCL) files. This works pretty good and gives you the option of editing the macro before executing it. I would really appreciate it, if you have basic available, if some of you would try it and give me some feedback as to how well it works. It has some specific code in it for our machines but should work with most standard tape output. Just answer the questions at the beginning for the machine output. The tape file must be copied to "c:\temp.txt" and the macro file created is "c:\tape2shp.mcl" If it works you can modify it for any specific machine. Bill Wepking Landis Gardner ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
