Hi All, I was wondering if anybody else has this problem or has found a way around this issue. When I import a drawing from Solidworks that has your part's on a fixture with clamps, component, the tombstone etc. it import's every thing on one layer with one color and it is very hard to turn anything off or on to see definition of the part. But I need that stuff in there to check clearance and what not. My question Is, Is there a way to get SmartCam to read part's as different layers by color or is there something in Solidworks I'm not doing right? Am I just stuck with everything being on one layer and having to go in and make my own layer's after importing? On some of these 4th axis jobs with multiple part's and side's it can get very confusing and time consuming. Any help would be greatly appreciated. Thanks in advance. Jeremy
Jeremy Noland CNC Programmer / Prototype 20522 Builders Street Bend, Oregon 97701 (541)330-2149 ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
