Benz; If there is planer geometry (i.e. circle/arcs) that you need to move/copy you can group the elements, Transform > Rotate > 3D then define your rotation angle and vector, select copy (or not, if your brave), then go. An AUTOnn plane will be created with the moved/copied geometry on it the go to Workplane > Change Name, and rename the plane to what you need.
Chuck Glawe Mold Manufacturing Precise Technology Inc. mailto:[EMAIL PROTECTED] http://www.precisetech.com -----Original Message----- From: Benz H. Babecki [mailto:[EMAIL PROTECTED] Sent: Friday, January 23, 2004 6:56 AM To: Smartcam forum (E-mail) Subject: [mfg-smartcam] PLANE ROTATION Is there a way to move or rotate a plane and all the elements in it? I ask because when I program our horizontals I define all my rotary position planes(B90, B180..etc.) and select planes when I create processes on that plane. Being the mistake prone human that I am I ocasionally misfire and put a plane in the wrong place. It is easy enough to move the elements with-in the plane I'm just curious if the plane itself can be manipulated once it is created. Thanks Benz Babecki Kingsbury, Inc. 10385 Drummond Rd. Philadelphia, PA 19154-3884 Phone: 215-824-4985 Fax: 215-824-4885 mailto:[EMAIL PROTECTED] http://www.kingsbury.com Kingsbury Inc ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ====================================================================== ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
