I've played with SMF questions 83, 117 and 173 but can't get exactly what I need. I don't want to have to draw the tools with different profile tops. This can really cause problems.
This is what I get right now:
N80 (MSG,T#1002 3.000 FACE MILL)
N90 G00 X5.7999 Y6.75 Z1.0 S4456 M13 D1
N100 Z0.1 <-----
N280 (MSG,T#1003 1.000 SPOT DRILL 132 DEG.) N290 G00 X0.0 Y4.1495 Z1.0 S3056 M13 D1 N300 G82 Z-0.1904 R0.1 F24.4 <-----
This is what I am trying to get: N80 (MSG,T#1002 3.000 FACE MILL) N90 G00 X5.7999 Y6.75 Z1.0 S4456 M13 D1 N100 Z0.1 <-----
N280 (MSG,T#1003 1.000 SPOT DRILL 132 DEG.)
N290 G00 X0.0 Y4.1495 Z1.0 S3056 M13 D1
N300 G82 Z-0.0904 R0.0 F24.4 <----- R of 0 the machine has an R Plane of 0.1 on all FXD drill cycles.
Any help would be appreciated. Thanks,
Kevin Clark Programmer Abbott Workholding Inc.
====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
