Your machine sounds exactly like a Sundstrand OM-3 5 axis machine. You could search for a code generator for an OM-3 to compare. Try a SWINC or Allen-Bradley control unit in your search.
Gene Bowen
SMARTCO
Bill Payter wrote:
Hi guys,I've part-written a code-generator for a five axis machine. The machine looks like a three axis vertical but has a rotary C-axis flat on the table and a tilting A-axis head. The C-axis is 360 degrees and the A-axis goes from 15 degrees back from vertical to 90 degrees forward, (it then looks just like an horizontal.)I've just about got the code working okay, for example if the work-plane (head) is tilted forward 30 degrees everything is easy, if the work-plane (head) is tilted back by 30 degrees the C axis has to be rotated 180 and the X & Y signs reversed.All this works fine but try as I might I can't get rotary feed motion for wrapped geometry to come out, whichever axis I wrap it about!Can anybody tell me what SMF file questions to set, (although I think I've tried everything) and can anybody tell me what to try in the @LINE section?Yours in anticipation!Bill in the UK
====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
