I purchased a bone yard factory AM/FM/CD radio to replace the flaky one in my
daughters 2000 Suzuki Esteem. When I went to install it, I found that the
previous owner had soldered the wires directly to the connector on the radio.
It was ugly and probably why the radio was hosed.
Even though there is a short wiring harness between the CD and main dash
harness, I cannot buy this from the dealer. No boneyards have this, or it isn't
worth there time to find/sell it.
I'd make a harness if I could find a compatible connector, but have had no
luck. Radio is Clarion, and it has one connector on back for all wiring. It is
rectangular with 14 pins. The pins are broken up into 3 sections. 2 sets of
6(2X3) on the either side with 2 pins in the middle. Center release detent.
Does anyone have any sources for radio connectors?
Thanks....Steve
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
