Try Napa part # 2-12076. It is a variety pack also, but has two of the size needed.
Stephanie BEGi/Bell Engineering Phone: 830-438-2890 Fax: 830-438-8361 www.bellengineering.net -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 28, 2008 1:12 PM To: MiataPower Subject: fuel injector O ring source? Gang, I tore one of the O rings on my RC injectors during the swap out of my fuel rail when prepping for smog check time. I pulled one of the O rings off the old 1.6 injectors and it was fine, albeit slightly hard and not snug on the injector. I have a box of asst. O rings, but they are not quite as thick/wide as the injector O rings - where is a good source to get quality replacement O rings and the seals where the injector meets the intake manifold? thanks, Mike _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
