Bryan and others:
Can you BCC other mailing lists so they dont bounce?
Thanks!
---------------------------- Original Message ----------------------------
Subject: Unable to deliver your message
From: "Yahoo!Groups" <[EMAIL PROTECTED]>
Date: Wed, May 7, 2008 10:04 am
To: [EMAIL PROTECTED]
--------------------------------------------------------------------------
We are unable to deliver the message from <[EMAIL PROTECTED]>
to <[EMAIL PROTECTED]>.
The email address used to send your message is not subscribed to this
group. If you are a member of this group, please be aware that you may
only send messages to this group using the email address(es) you have
registered with Yahoo! Groups.
If you would like to subscribe to this group:
1. visit
http://groups.yahoo.com/group/eGCMC/join
-OR-
2. send email to [EMAIL PROTECTED]
For further assistance, please visit
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
--- Begin Message ---
On my '01 I run the Racing Beat 1.25" tubular up front on the "soft"
setting and no rear bar. Shocks/springs are Tein Flex 7/6 (400/330ish).
I'm also running a KAAZ LSD which is set to max lockability. I'd say the
car is pretty neutral and being a turbo car, never hurting for power
oversteer but very balanced and controllable. As with any car, it will
dive in on a gentle lift--even more than average with the clutch type
diff. With the rear bar installed, the car was playful unless I ran the
front bar on the hardest setting. I opted to soften both ends for ride
comfort and traction.
I think given where I run the bar, the 1.125" tubular bar on "hard" with
no rear bar would be fine. I imagine that's somewhat comparable to the
torsional stiffness of a solid 1" bar, right?
OH and I haven't had any troubles with the extra bracing requirements of
the RB tubular bar. They do come with nice fat cast aluminum mounts for
the big bar. A couple track days hasn't broken anything. Neither have DC
roads. No other issues with it.
Matt
> Hey all,
>
> I'm
> on the fence about upgrading the front sway on The Tick and had given
> the FM Sway a thought largely because I think
> $300 is a bit much for all the extra bracing to add an RB tubular bar
> (that I may not
> even like). For those driving an 01+ car, what are your
> impressions?
> Any issues?
>
> -Bryan
--- End Message ---
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
