We sell/install a lot of both products, for the epoxy you will get best results 
if you roughen the floor, sandblast / shotblast or a grinder this will ensure 
the epoxy really binds to the concrete.  On types of epoxies to use I STRONGLY 
suggest a 100% solids as its thicker and has no VOC's. 

The gfloor is another good product that is reasonably priced. It wears really 
well (we have it in our trailer and it gets lots of abuse!). Down side is that 
there are seams every 10' but those can be taped down. We have also heat welded 
the rolls together along the seams. 

I can assure you the gfloor will last a VERY long time. 

Hope that helps. 
Quentin J Sarafinchan

Sent on the TELUS Mobility network with BlackBerry

-----Original Message-----
From: "Sonny Tu" <[EMAIL PROTECTED]>

Date: Tue, 13 May 2008 14:49:29 
To:<[email protected]>
Subject: [NPC/NMC] Garage Flooring


I know this has been covered before (pardon the pun), but just wanted to see
what people have used out there & how satisfied have they been with the
product they used.

I've just signed a contract on a new house & the closing is a few weeks
away.  The garage floor is brand new with very little in the way of debris &
stuff that would have to be cleaned/blasted off.  Intersestingly, the
concrete looks as if it's been polished & doesn't appear like the usual
porus concrete flooring.

What have you guys used to coat the floor with & how satisfied have you been
with the results a few years later?  I was thinking about epoxy or G-floor
(http://tinyurl.com/3wqdcz).

TIA.

Regards,
Sonny

  If everything is coming your way,
  You're in the wrong lane!!!

  http://www.sonny2.com

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to