We usually use only the bushing for the bottom of the injector. So you will need 4 of those kits. There is a pkg qty of 20, but I'd have to get the p/n from Tim tomorrow.
Stephanie BEGi/Bell Engineering Phone: 830-438-2890 Fax: 830-438-8361 www.bellengineering.net -----Original Message----- From: Brad Franks [mailto:[EMAIL PROTECTED] Sent: Friday, May 16, 2008 3:01 PM To: [EMAIL PROTECTED] Cc: [email protected] Subject: Re: CAS O-ring and Fuel Injector Insulator Thank you Stephanie. Looking at that part it appears as though it is 3 pieces. An O-ring for the top of the injector, a u-ring and a bushing. Am I correct in assuming you use the o-ring at the top of the injector, u-ring at the center of the injector and the bushing on the nozzle to interface with the intake manifold (aka as the insulator)? It's different than what I have in my hand - hence my nervousness in using it. Stephanie Turner wrote: > We use Napa p/n 2-12076 for the injector seals. It is actually labeled as an > engine management product, and comes in a multi-size pack. > > Stephanie > > BEGi/Bell Engineering > Phone: 830-438-2890 > Fax: 830-438-8361 > www.bellengineering.net > > > -----Original Message----- > From: Brad Franks [mailto:[EMAIL PROTECTED] > Sent: Friday, May 16, 2008 2:34 PM > To: [email protected] > Subject: CAS O-ring and Fuel Injector Insulator > > It seems that NAPA has no idea what a CAS o-ring/seal is, they don't > list it anywhere in their computer. Does anyone have a secret NAPA part > number or am I calling FM back? > > Also, when I pulled my fuel injectors one of the insulators was bunked. > It broke apart in my hand. I ordered what I think is the correct item > from NAPA, a fuel injector seal kit: > > http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=ATM > &PartNumber=200400&Description=Fuel+Injector+Seal+Kit > > I can't tell if that actually has the insulator or not. If not, where do > I source these from? Is there another secret NAPA part number? > > The closest Mazda dealer is 80 miles away, the closest Ford dealer is > 40. I am trying to get this wrapped up before next Tuesday when the rain > comes back... > > Thanks! > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > > _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
