You can get an extra 5 or 6 inches of wire length by cutting the black ziptie 
at the fender well. 


-----Original Message-----
From: Joe Perez <[EMAIL PROTECTED]>
To: Frank Devocht <[EMAIL PROTECTED]>
Cc: [email protected]
Sent: Mon, 2 Jun 2008 11:21 am
Subject: Re: maf sensor position



---- Frank Devocht <[EMAIL PROTECTED]> wrote: 
> Is it ok to install the maf sensor sideways?  Might this put too much stress 
> on the hot wire?

'Tis fine. Those things have been installed in every possible orientation with 
no ill-effects. The forces imposed on the wire in every direction by turning, 
braking, hitting bumps, etc are far greater than the force of gravity pulling 
down on the sensor at rest. 

- Joe Perez in the Red '92


_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to