And they ALWAYS go out on the hottest weekend of the year!!!
 
Jim
 
 
In a message dated 6/23/2008 7:32:58 A.M. US Mountain Standard Time,  
[EMAIL PROTECTED] writes:

What a weekend.  I had  intentions of working on the Italia bodywork but....

Two weeks ago AC  compressor stopped working for the main floor (freon leak 
from evap coil)  but there was no hurry to fix as upstairs unit was functioning 
fine (cold  air drops) and the basement located air handler for the main 
floor pulls cool  air from the basement anyway so the main floor stayed mostly  
comfortable.  It was on my list of things to  do. 

Saturday the upstairs unit stops blowing air.  So  now I have no AC in the 
whole house. Compressor working fine but no air  blowing.  Determined it had to 
be either blower motor controller board or  motor itself.  Found a replacement 
controller board locally and plugged  it in with no change.  Yanked squirrel 
cage with 4 speed blower motor  from furnace cabinet (not easy in 140 degree 
attack after just having  knee surgery on Wednesday) and found windings burned. 
We have  had a lot of power outages and brownouts lately so that probably 
caused  it. 

Made a few calls and a direct replacement Trane part#   motor was $300 so 
being the cheap bastard I am I attempted to source a  cross reference motor 
from 
various supply houses (Grainger, Johnstone, etc)  but no luck late on a 
Saturday.  Giving up for the day I jammed a small  10" window fan in the 
furnace 
with duct tape to get some airflow but only  lasted about 2 hours until evap 
coil 
froze up from lack of adequate  airflow.  It was enough to cool the upstairs 
bedrooms to 80 though  so could get to sleep anyway. 

Worked ebay and google Sunday AM to  try and find a properly priced 
replacement motor that I could have overnight  shipped. While researching I 
went to the 
garage to try and separate the motor  from the squirrel case housing but it 
would not budge even with heat,  hammering, pry bars and gear pullers.  Factory 
must have used  locktight or epoxy on the shaft. They obviously have no 
intention of  letting anyone replace just the motor (the whole squirrel cage 
assembly new is  $600).   Dejected and sweaty hot I watched NASCAR at Sonoma  
roadcourse only to see my least favorite driver, Kyle Busch, win and most  of 
the 
"road course specialists" in DFL. 

After the race and my mind  was clear I remembered to check Craigslist.  
Found a whole used furnace  of similar vintage and model to mine the next town 
over.  Bought the  whole thing for $100.  Transferred the squirrel cage in 
about 
45 minutes  and got cold AC back by 7pm.

Lesson learned is never leave  yourself without a backup AC if over 10 years 
old and always check  craigslist first.  I now have spare parts in inventory 
for the  burner, exhaust motor, sensors and controller board.  I have  full OJT 
Trane furnace experience and have memorized the schematic manuals if  anyone 
needs advice. :-)

Randy  
  
____________________________________
 _Get the Moviefone Toolbar_ 
(http://toolbar.aol.com/moviefone/download.html?ncid=aolcmp00050000000011) . 
Showtimes, theaters, movie news,  & more!  


_______________________________________________
Miatapower  mailing  list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower





**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.      
(http://autos.aol.com/used?ncid=aolaut00050000000007)
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to