(Continuation of my randomly available boost control woes) If I'm getting a warning box when I try to open MAP files that states "Problem loading..." - would that be significant of potentially corrupt data?
I may have found a connection between files that produce that warning, and files that do not produce boost control when loaded/ stored to the Link. It appears to randomly occur when I tune and save a map file from a datalog. There's no warning when the file is saved, but the error occurs when the same file is opened. "0619Bkpa.map" - original MAP file, no errors, working closed loop boost control "0619Bkpa2.map" - MAP file created from datalog using the above map, errors on opening "0622kpa+2.map" - Above MAP file further tuned, loaded, stored, no boost control, no errors when opening in DLL So at that point I changed boost control settings step by step until I was back at the original settings in "0619Bkpa.map" and still had no boost control. "DL0626a.TXT" - the first datalog from "0622kpa.map" "DL0626e.TXT" - the final datalog from "0622kpa.map" with boost control returned to known working settings "0619Bkpa.map" zip archive with above files: http://ebersol.com/FE3/linkmaplogs.zip _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
