The have a book of them? Cool.. may have to do that. Thanks, Keith!
We thought about the straight to ignition option, but wanted it to be
right.
Wally
"Keith Tanner"
<[EMAIL PROTECTED]>
Sent by: To
[EMAIL PROTECTED] <[email protected]>
apower.net cc
Subject
07/08/2008 12:11 PM RE: NMC - Electric rad. fan
control
Go to NAPA and get them to pull out the Thermosensor Book. You'll find
hundreds, with a range of connector styles, thread types and on temps all
documented.
Or just wire it straight into the ignition.
Keith Tanner
Flyin' Miata
[EMAIL PROTECTED]
http://www.flyinmiata.com
1-800-FLY-MX5s (orders)
1-970-464-5600 (tech)
2008 FM Open House: August 14-17
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, July 08, 2008 9:23 AM
To: Ray Ayala
Cc: [EMAIL PROTECTED]; [email protected]
Subject: Re: NMC - Electric rad. fan control
It does have AC (that miraculously works!).. so we need to intercept the
engage wire and rig that up properly as well.
Looks like (thanks Rob!) I can pillage a temp switch off an Escort
GT/Miata, which will give me a turn on around 206*F/97*C... so that's half
the battle. I forgot the Miata has one, since mine has been broken off for
a couple of years and I use ECU control instead.
Anyone know of other vehicles that have a thermoswitch that might be lower
(something closer to 185-190)?
Wallyman
Inactive hide details for " height="16">"Ray Ayala" <[EMAIL PROTECTED]>
"Ray Ayala"
<[EMAIL PROTECTED]
mail.com>
Sent by:
miatapower-b To
[EMAIL PROTECTED]
power.net "Rob Ebersol"
<[EMAIL PROTECTED]>
,
07/08/2008 <[EMAIL PROTECTED]
09:47 AM om>
cc
[EMAIL PROTECTED]
net
Subject
Re: NMC - Electric
rad. fan control
You'll need a 2nd relay if the car has A/C. It should turn on when the
A/C
compressor runs.
----- Original Message -----
From: "Rob Ebersol" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Tuesday, July 08, 2008 6:15 AM
Subject: Re: NMC - Electric rad. fan control
> Use any OE thermoswitch (near the desired on temp) to throw a relay
> to ground. They shouldn't be more than $5 salvage.
>
> On Jul 8, 2008, at 8:55 AM, [EMAIL PROTECTED] wrote:
>
>> Got a buddy with a 70 Cutlass, converting to electric fans on the
>> super cheap. Have the fans already (2 speed/3 wire dual fan
>> assembly from early 90's Intrepid) but we need a fan controller.
>> Does anyone have a cheap and easy way to turn them on/off @ a set
>> (or adjustable) water temp? I see Jeg's has stuff in the $40+
>> range, just wondering if there is a budget DIY option out there for
>> cheaper.
>>
>> Thanks.
>>
>> Wallyman
>> _______________________________________________
>> Miatapower mailing list
>> [email protected]
>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
<<inline: graycol.gif>>
<<inline: pic00623.gif>>
<<inline: ecblank.gif>>
<<inline: C6809057.gif>>
<<inline: C3012585.gif>>
<<inline: C7484579.gif>>
<<inline: C4221193.gif>>
<<inline: C9373009.gif>>
<<inline: C9173616.gif>>
<<inline: C1999192.gif>>
<<inline: C9631813.gif>>
<<inline: C4533013.gif>>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
