1. Lots of Liquid Wrench/PB Blaster, bang on it a bit with a hammer
and let it sit overnight.
2. Get a 1/2 inch breaker bar and 1/2 inch socket. Don't mess with 3/8
with that kind of force.
3. Get a stronger 1/2 inch Impact Wrench.
---------------------------------------------------------
There are 10 types of people, those who understand binary and those
who don't.
On Sep 4, 2008, at 8:57 AM, pm wrote:
hi,
the PowerPlantFrame PPF is secured, (on the rear) , with 2 17mm
bolts. the forward one is stuck. i started with a 3/8 ratchet,
went to an air ratchet, 1/2 air gun, 3/8 ratchet w/ a 8' black pipe
extention, (this worked quite well at snapping the socket :). if i
had a 3/8 to 1/2 adapter i would use that with the 3/8 ratchet and
pipe but i do not have one...suggestions?
tia,
peter
--
Medio tutissmus ibis
You will go most safely by the middle course
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
