Actually you will reuse the intake and exhaust gaskets, the thermo gasket is 2 bucks, I believe the oil pan is RTV not a gasket so all you need is the cam cover,WP o ring and thermo gasket. Larry White Knight 1991 Crystal White #99 CSP Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger Whooosh 2004 Titanium Mazdaspeed MX-5 LowCountry Miata http://www.lowcountrymiataclub.net Masters Miata RAGS 074 From: pm [mailto:[EMAIL PROTECTED] Sent: Saturday, September 06, 2008 3:14 PM To: Larry Alster Cc: Miata Power List Subject: Re: gasket sets On Sat, Sep 6, 2008 at 2:07 PM, Larry Alster <[EMAIL PROTECTED]> wrote: I'm not sure I understand why you need a gasket set if you're not taking the head off the engine. Just what are you going to do to the engine that you need gaskets for if the head isn't coming off? Other than a timing belt that needs a cam cover gasket what else can be done that needs gaskets if the head is still on the engine? sorry i wasnt clear. i bought a block with a head on it. i am going to swap all the peripherials from the bad motor to the "new" motor. a partial list of things i need are
exh intake thermo water inlet o-ring i will take off the oil pan water pump and i am sure more i will thonk of later peter -- Medio tutissmus ibis You will go most safely by the middle course
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
