Hi, it looks like my 95 motor was bored to 0.50 over because that number is stamped on the pistons. Wouldnt that be alot to bore coming from a stock block? If the cylinders are indeed .50 over, that block is probably not a good candidate for machining, right?
tia, peter btw, i removed the crank/timing gear key by clamping vise grips onto the side of the key and levering it out -- Medio tutissmus ibis You will go most safely by the middle course
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
