Don't even pull the console before you buy the new boots. They WILL be ripped...
On Tue, Oct 14, 2008 at 4:05 PM, Larry Alster <[EMAIL PROTECTED]> wrote: > BTW, if you've never pulled the console before you might find you need to > replace those shift boots. Check them both for tears. > > > > > > > > Larry > > White Knight 1991 Crystal White #99 CSP > Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo > Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger > Whooosh 2004 Titanium Mazdaspeed MX-5 > > LowCountry Miata http://www.lowcountrymiataclub.net > Masters Miata > RAGS 074 > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *David Brown > *Sent:* Tuesday, October 14, 2008 4:03 PM > *To:* [email protected] > *Subject:* Re: NPC - Console removal > > > > Larry, it's a shame you're from New York. Otherwise, you'd be perfect ;^) > > Thanks again for saving the day. > > > On Tuesday, October 14, 2008, at 03:53 PM, Larry Alster wrote: > > You have to remove the window stitches, there is a screw under them., Great > idea right!!! > > > > You have to slip a very thin blade of some sort, I use a dispaosable phone > credit card, in the front edge of the switch to console gap and push it > around to pop the clips. > > > > > > > > Larry > > White Knight 1991 Crystal White #99 CSP > Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo > Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger > Whooosh 2004 Titanium Mazdaspeed MX-5 > > LowCountry Miata *http://www.lowcountrymiataclub.net > *Masters Miata > RAGS 074 > > > > *From:[EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *David Brown > *Sent:* Tuesday, October 14, 2008 3:51 PM > *To:* [email protected] > *Subject:* NPC - Console removal > > > > 2001 LS > > I need to pull the cup holder/storage box portion of my console so I > can reattach the spring that controls the rear cup holder lid. > > I've pulled the two screws on the sides beside the shifter and the two > screws in the deck of the storage box. The console shifts and moves but > will not come all the way up. It seems to be attached in the > neighborhood of the of the shifter boot and in front of the door window > switches. > > What have I missed or how do I hold my mouth so it will release and come > free of the transhump? > > TIA > > El Brown—O— > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > -- Robert McElwee and Blue Flash "The 50 MPG Miata" www.lightweightmiata.com/mpg Lightweight Miata Forum: www.lightweightmiata.com/forum The Miata Trailer Project: www.lightweightmiata.com/trailer
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
