True, but they are sold for ball joints. For bushings, I suspect they would work fine.
Ken Bogart ----------------------------------------------------- 96 Montego Blue FFS Coldside (His) 97 Black & Tan (Hers) 90 Crystal White (sons) ------------------------------------------------------ http://www.miatacare.com http://www.cincimiata.com On Wed, Mar 4, 2009 at 7:30 PM, Larry Alster <[email protected]> wrote: > But we are not talking about ball joints. Which he wouldn't be using a press > for anyway. > > We are talking about pressing out bushings in the suspension of the Miata. > > > > Larry > > White Knight 1991 Crystal White #99 CSP > Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo > Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger > Whooosh 2004 Titanium Mazdaspeed MX-5 > > LowCountry Miata http://www.lowcountrymiataclub.net > Masters Miata > RAGS 074 > > -----Original Message----- > From: Ken Bogart [mailto:[email protected]] > Sent: Wednesday, March 04, 2009 5:42 PM > To: Larry Alster > Cc: Shaun Bogan; [email protected] > Subject: Re: Hydraulic shop press accessories > > I have those and have found them rather worthless on ball joints. I > have tried them on both my Crown Vic and Mercedes and it never budged > a thing. Even with an impact wrench. The only solution I have found > that worked on ball joints is a big f'ing sledge hammer. > > Perhaps they work fine on bushings... > > > Ken Bogart > ----------------------------------------------------- > 96 Montego Blue FFS Coldside (His) > 97 Black & Tan (Hers) > 90 Crystal White (sons) > ------------------------------------------------------ > http://www.miatacare.com > http://www.cincimiata.com > > > > > On Wed, Mar 4, 2009 at 4:50 PM, Larry Alster <[email protected]> wrote: >> I have a shop press and I found it to not be as useful in doing bushings > as >> one of these kits. >> >> >> >> http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=38335 >> >> >> >> http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=4065 >> >> >> >> >> >> >> >> >> >> >> >> Larry >> >> White Knight 1991 Crystal White #99 CSP >> Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo >> Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger >> Whooosh 2004 Titanium Mazdaspeed MX-5 >> >> LowCountry Miata http://www.lowcountrymiataclub.net >> Masters Miata >> RAGS 074 >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Shaun Bogan >> Sent: Wednesday, March 04, 2009 4:42 PM >> To: [email protected] >> Subject: Hydraulic shop press accessories >> >> >> >> I’m planning on getting a shop press to do a couple of jobs. The miata >> needs bushings and my bmw needs rear wheel bearings. I’m trying to find a >> set of press “dies” or “punches” I think? Basically whatever I need to >> attach to the press to push out bushing and bearings. Obviously they need >> to be different sizes. Anyone know of a source for such a kit? >> >> >> >> Thanks! >> >> >> >> Shaun >> >> >> >> _______________________________________________ >> Miatapower mailing list >> [email protected] >> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >> >> > > _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
