I'm a little confused about what you're saying. Your actual wg base with no ebc is 144, but you've set wgbase in the link to 162? If that's what you're saying, you won't have any luck. You need to set wgbase to what the can actually makes. Or are you saying you set the can to actually make 162 without EBC, which is what you should be doing? Once base is set, you will then need to play with wg sens. Doing it step by step per the directions is the key and DLL makes it all much, much easier.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Johnson Sent: Sunday, May 10, 2009 11:31 AM To: [email protected] Subject: Greddy turbo and Link EBC problems Hey, I've got issues with my Greddy turbo, but more specifically the Link boost control. I've raised my boost target to 180kpa, increased the map limit to 195kpa, but the car will not boost beyond 10psi. I have one of the original WRX Denso EBC and it works fine upto 10psi, but wont go beyond. My set up is as follows; Webcam505 camshafts Fidanza cam gears Greddy Manifold/ TD04 turbo 2.5" turbo back exhaust LC-1 WB02 VTA Bov I've tried setting the link with a wastegate base of 162, WGRPM 3700, sensitivity currently at 50. Actual Wastegate base is circa 144kpa, but I read somewhere that 9psi is a better base when shooting for 12psi Any tips and pointers will be greatly appreciated. Cheers _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
