I have to check my tool box, but I am pretty sure the axle nuts are 29mm, but
they are definitely the same size for 90-05.
for the speedo cable just use a crescent wrench - from memory it is a 24mm I
think. After it is loose it is easily removed by hand.
The seat belt bolts are actually SAE, 7./16"
-Mike
----- Original Message -----
From: "Chad J. Douglas" <[email protected]>
To: "Blake Thompson" <[email protected]>, "<[email protected]>
<[email protected]>" <[email protected]>
Sent: Wednesday, May 6, 2009 4:20:15 PM GMT -08:00 US/Canada Pacific
Subject: Re: stupid miata questions about tools
Re: stupid miata questions about tools T-40
4mm
Not sure about the 1.6, but I think it’s 30MM on the 1.8
Why bother, just use pliers on the knurled part. Although, it looks like
somewhere between 21 and 24.
9/16
On 5/6/09 2:11 PM, "Blake Thompson" < [email protected] > wrote:
what size is the torx bit for taking off the soft top strikers?
the rear caliper adjustment allen wrench?
the two different axle nut sizes (1.6 and 1.8 had different thickness axles)
the speedometer cable at the transmission.
What size is the SAE bolt that holds the seatbelts in to the car? a 16mm will
work but it's sloppy as hell.
I know what these tools look like, as in I have them, but I am trying to put
together a backup set with just the specific things I need, mostly for racing.
_______________________________________________ Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
