aux fan fuse is hot off battery, so with the switch off you're feeding
12volts back into the ecu through the fan driver.
 

Bill Cardell 
TurboDog's Dad 
Flyin' Miata 
1-800-359-6967 (sales) 
970-464-5600 (tech support) 
www.flyinmiata.com 
www.fmwestfield.com 

 

________________________________

From: [email protected]
[mailto:[email protected]] On Behalf Of Eric McCord
Sent: Tuesday, July 14, 2009 9:24 PM
To: Ray Ayala
Cc: Miata Power List
Subject: Re: Link ECU fan control


I thought it was a Mk2 but I could be wrong. I'll check again tomorrow.
Here is the ODD thing. I now have a switch added to take the relay to
ground and when I turn off the ignition if the switch is OPEN my keypad
has the Adjust, Edit and Select lit dim and nothing else. As soon as I
switch the line to ground they go out. This is with the key OFF. I just
noticed it tonight when I got home in the dark.


The relay has it's power coming from the aux fan fuse under the hood
that should not be getting power with the key off. It is very odd that
only the LED's for the names are getting lit but nothing else.

Eric

On Tue, Jul 14, 2009 at 7:28 PM, Ray Ayala <[email protected]> wrote:


        Is it a Mk-I by any chance?
        
        ----- Original Message ----- From: "Eric McCord"
<[email protected]>
        To: "Ray Ayala" <[email protected]>
        Sent: Tuesday, July 14, 2009 7:02 AM 

        Subject: Re: Link ECU fan control
        
        
        

                It's a 1.6
                
                On Tue, Jul 14, 2009 at 9:25 AM, Ray Ayala
<[email protected]> wrote:
                
                

                         Which Link ECU ?
                        
                        ----- Original Message -----
                        
                        *From:* Eric McCord <[email protected]>
                        *To:* Miata Power List
<[email protected]>
                        *Sent:* Monday, July 13, 2009 6:43 PM
                        *Subject:* Link ECU fan control
                        
                        I am trying to get the ECU fan control setup. I
connected a relay to 1L per
                        the instructions but I still don't get the fans
to run when it gets hot. I
                        can get the fans to come on by grounding the
relay but the ECU is not taking
                        it to ground. I know I must be doing something
wrong...........just can
                        figure it out.
                        
                        Eric
                        
                        ------------------------------
                        _______________________________________________
                        Miatapower mailing list
                        [email protected]
        
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
                        
                        
                        




_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to