No hardware for it, IIRC. Bill Cardell TurboDog's Dad Flyin' Miata 1-800-359-6967 (sales) 970-464-5600 (tech support) www.flyinmiata.com www.fmwestfield.com
________________________________ From: Frank [mailto:[email protected]] Sent: Tuesday, July 28, 2009 4:34 AM To: [email protected]; Bill Cardell Subject: Re: Link mk1 ecu modification for air temp - can it do boost control? I noticed that the modifications for the MK1 add Knock (pin 49), WBO2/EGT (pin 50) and Air Temp (pin 33). Is it possible to add boost control as well, or is that not possible in the software? From: Frank <mailto:[email protected]> Sent: Tuesday, July 28, 2009 11:07 AM To: [email protected] Subject: Re: Link mk1 ecu modification for air temp never mind. The dot is pin 1, numbered in opposite direction of the clock . From: Frank <mailto:[email protected]> Sent: Tuesday, July 28, 2009 10:31 AM To: [email protected] Subject: Link mk1 ecu modification for air temp I'm about to modify my MK1 link ecu for air temp / boost control / WBO2 I have the chip and know what to modify (pin 33, 49, 50), but ... what is pin 1 on the chip? I haven't opened the ecu yet, so maybe it's imprinted on the socket, but I thought I'd ask before i start tearing things apart Frank Devocht ________________________________ _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower ________________________________ _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
<<Emoticon1.gif>>
<<Emoticon1.gif>>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
