The only point of interest I can offer is that the same amount of boost comes at a higher turbo RPM (say 100k RPM instead of 90k RPM), so be aware of over spinning the turbo (shaft end play, lubrication, etc). Also, at high load short burst, the intercooler is going to act more like a heat sink than a heat dissipation device. Adding mass to it may be useful. If possible, bring water/alcohol mix to spray it down after a run, but it's unlikely that you'll need any system on the bike during the run.
Good luck, have fun, and stay safe! Mark On Thu, Aug 27, 2009 at 9:22 PM, Eric Schieb <[email protected]> wrote: > I will be supporting a customer at Bonneville. He recently purchased a > turbo bike with a standalone ECU that was tuned at sea level. As his > engine tuner, what things do I need to consider as we head to Bonneville > (high elevation, dry, hot)? > > Obviously we will be going for the maximum safe power. > > thanks for the tips, > > Eric Schieb > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
