I think I used that green temp sensor connector that goes to the back of the head on the 1.6...
My local NAPA actually had some injector pigtails in stock, which I used on some rx7 injectors that had square-ish connections. You could call around and find one for a test fit. It was just over $2. On Dec 3, 2009, at 9:20 AM, Ray Ayala wrote: > Not sure about the RCinj connector but the rest is correct. > ----- Original Message ----- > From: Eric Quimby > To: [email protected] > Sent: Wednesday, December 02, 2009 10:03 PM > Subject: hey Ray or any other Link gurus, need help finding or making a knock > sensor > > Anyone have a knock sensor with cable laying around? Or has anyone made their > own and know exactly which parts are needed? I picked up a Link for my 94 and > it is missing the knock sensor. I believe the Bosch knock sensor is pretty > easy to source and can be used with an RC injector connector, then simply > wire it into an RCA connector. Does this sound about right, anyone done this > personally? > > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
