Snap ring pliers also work for this. Ken Bogart ----------------------------------------------------- 96 Montego Blue FFS Coldside (His) 97 Black & Tan (Hers) 90 Crystal White (sons) ------------------------------------------------------ http://www.miatacare.com http://www.cincimiata.com http://www.miatagathering.com http://www.bcchallenger.org MiataMail.com list owner
On Thu, Feb 4, 2010 at 6:34 AM, Steve Kiffmeyer <[email protected]> wrote: > I made a homemade tool out of desperation that worked great. I took a scrap > piece of wood that was about .75 X .75 X 12 inches. I put 2 decking screws > into one end to correspond with the slots on the mast cover...approximately > 1 inch apart. The tips of the screws jutted out one side about .25 inch. The > tips of these screws were spaced to match the slots on the antenna mast > cover. This tool easily removed the cover when I couldn't get it off any > other way short of destroying it. I spent about 10 minutes building the tool > and removing the threaded cover...no damage. > > regards...Steve > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
