My mistake, I was thinking uber charger, which would not interchange between nb and na. Only issues I can think of off the top of my head, msd won't work on nb and might be pulley length issues. Wiring is different on the MAF, so if you use the mustang one it will take some fiddling.
Bill Cardell TurboDog's Dad Flyin' Miata <http://www.flyinmiata.com/> HELP FLYIN' MIATA GO TO TARGA NEWFOUNDLAND! <http://www.flyinmiata.com/projects/targa/index.php> Targa Miata Facebook page <http://www.facebook.com/pages/Flyin-Miatas-at-Targa-Newfoundland/144488 045605566> FMWestfield <http://www.fmwestfield.com/> Sales 1-800-359-6957 Tech 970-464-5600 Before you call, check out http://www.flyinmiata.com/FAQ/ ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Chris Messmer Sent: Thursday, April 14, 2011 11:17 AM To: B Johnson Cc: [email protected] Subject: RE: Looking for used supercharger for 99 that is a good question, depends on what you want with it. This is Corky Bell's 1.8 liter autorotor kit with MANY upgrades I have 2 or 3 (or 4?) pulleys if i remember correctly, i have 2 snout pulleys (one for 8 and one for 10 psi when used with the crank pulley that comes with the kit) and 2 crank pulleys (the standard that gives you 6, 8 or 10 psi depending on the snout pulley AND .... I had corkey (Bell) make me an extra large crank pulley that gives you about 12 Psi with the smallest snout pulley). I also have a super sized intercooler that Corky made for me. a cool addition to this kit is the UPGRADED MSD RETARD BOX. The MSD-boost retard box (which as designed, pulls a limited amouint of ignition timing based on boost) has been modified to both increase the boost reactance window to 10 psi (from the original 4 or 6) AND it has a tuning knob vary the degrees of timing (removed) per Psi of boost. I also have the rising rate fuel pressure regulator . AND i even have a Mustang 5.0 liter MAF meter that has been re-calibrated to take the place of the restrictive Miata MAF that I can throw in as well. I was concerned about the upper mount to the head so the kit has been improved with a sturdy bracket that bolts to snout of the supercharger (you can see the billet steel piece i had made in the pick below, along with the vacuum controlled bypass valve I added to the kit The whole kit was working beautifully when i pulled it off 4 years ago . I was running the 12 psi pulley setup at that time and the flying miata ecu . (it is argued that the stock ecu and injectors run out near 10 psi but .... it ran fine for me at 10 psi (with stock ecu & injectors with the rising rate regulator and MSD) I never ran the stock ecu at 12 psi as I pulled off the msd and rising rate regulator at the same time as installing the biggest crank pulley and the FM ecu. Eventulally, I pulled off the supercharger as smoging it in california had become more bother than i was interested in .... and Corky had offered to hook me up with one of his amazing (and has been easier to get thru smog inspections) Turbo set ups that still works like a million bucks ... ( thanks Corky : ) AND that is why it is available I may have more goodies that I would like to include with it (I think i have a "Hal meter " air/fuel meter ... and perhaps some other cool stuff too). Chris Messmer Roos Instruments, Inc. 2285 Martin Ave Santa Clara, CA 95050 From: B Johnson <[email protected]> To: <[email protected]> Date: 04/14/2011 07:36 AM Subject: RE: Looking for used supercharger for 99 ________________________________ chris, how much? ________________________________ To: [email protected] Subject: Re: Looking for used supercharger for 99 From: [email protected] Date: Wed, 13 Apr 2011 13:01:25 -0700 CC: [email protected]; [email protected] I have a complete whipple (bell) supercharger setup for a 94 miata that i could sell at a good price .... not sure if it fits a 99 Chris Messmer Roos Instruments, Inc. 2285 Martin Ave Santa Clara, CA 95050 From: [email protected] To: [email protected] Date: 04/13/2011 12:22 PM Subject: Looking for used supercharger for 99 Sent by: [email protected] ________________________________ Sent from my Verizon Wireless BlackBerry _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower <http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower> _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower <http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
