What are you using for a fuel system, tank, fuel pump, regulator, fuel rail? Are you using a return line? What's your fuel pressure? Les. apexautoeng.com
In a message dated 6/13/2011 7:12:33 P.M. Eastern Daylight Time, [email protected] writes: I have a 2002 Miata engine/trans in a Lotus 7 clone. It runs and drives perfectly, but suffer from some sort of heat soak issue. It will run fine, is you switch it off and they restart it within seconds your OK. But if you leave it for 5 mins it will not restart. If you take the hood off and let it cool down it with re-start perfectly. I have replaced the cam position sensor on the top of the engine on the back of the inlet cam. But it made no difference. I added a fan controller so I could get the fan to run on after switching the engine off, but it did not really help. So maybe I just have to swap sensors until I find the right one. But what logic can I use to try and decide were to start. Thanks Graham _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
