I'm not sure if we're talking about the same device here. This is what mine looks like:
http://maccentral.macworld.com/news/9909/images/fig1107.gif except that the cable coming out of it has the aaui connector rather than what appears to be a serial cable. It plugs right into the ethernet port on the 6100, and apparently draws power from there--there is no other power connector on it--only the cable with the aaui connector, and the 2 RJ-45 jacks. Is this what you're talking about here? Thanks, Andy > That 2nd device was a 10BaseT to LocalTalk transceiver used > principally for LaserWriters and other networkable printers without > ethernet. They run about $100 new and I bought one for a LaserWriter > NT used for about $50. With the power supply, you could use it as a > simple two port hub. This is an automated message from the MichiMac mailing list manager. You are subscribed to MichiMac as <^A>. ** Make a note of that -- you can only post, change mode (between digest and feed), and unsubscribe from <^A>. If you have more than one email address, please keep this email handy in case you ever have problems posting, changing mode, or unsubscribing. ** Also note that this list only accepts plain text email. The list server is set to reject styled text and any type of attachment. Anything other than plain text will be bounced. To post to the list, email: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> To switch to feed mode, email: <mailto:[EMAIL PROTECTED]> To switch to digest mode, email: <mailto:[EMAIL PROTECTED]> --> AOL users, remove "mailto:"; All questions about this mailing list not covered in the FAQ (linked at <http://lowendmac.com/lists/>) or netiquette page <http://lowendmac.com/lists/netiquette.shtml> should be sent to <mailto:[EMAIL PROTECTED]>
