I think I have done before The patch was 0001-Disable-YUV422-output-for-micron-sensors.patch ?
On Nov 18, 5:56 pm, GWater <[EMAIL PROTECTED]> wrote: > My patch didn't get out? - I sent it half an hour ago. > > GWater > > Brian Johnson schrieb: > > > mplayer is trying to use the yuyv format becuase this sensor claims to > > support that format. while it is true the sensor does support yuyv > > there are currently bugs in the code that prevent that format from > > working right. please try the following patch that removes support for > > yuyv. Then try mplayer again with libv4l > > > On Tue, Nov 18, 2008 at 11:10 AM, Vinicio Nocciolini > > <[EMAIL PROTECTED]> wrote: > >> GWater wrote: > >>> Great, were getting close. > > >>> Now don't change the microdia directory anymore. We don't want to lose > >>> what we already got. > > >>> Please download libv4l here: > >>>http://koji.fedoraproject.org/koji/buildinfo?buildID=70038 > > >>> Then install it using: > >>> # rpm -i libv4l-0.5.4-1.fc9.i386.rpm > > >>> Then run mplayer with the LD_PRELOAD prefix: > >>> $ LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so mplayer tv:// -tv \ > >>> driver=v4l2:width=640:height=480:fps=25:device=/dev/video0 -vo xv > > >>> Good luck, > >>> GWater > > >>> Vinicio Nocciolini schrieb: > >>>> GWater wrote: > >>>>> Here's the correct version. > > >>>>> GWater > > >>>>> GWater schrieb: > >>>>>> WAit - I send the old patch again, sorry. > > >>>>>> GWater > > >>>>>> Vinicio Nocciolini schrieb: > >>>>>>> GWater wrote: > >>>>>>>> Hey, > >>>>>>>> you need to apply the patchfile before something happens ;) . > > >>>>>>>> after switching to development branch do: > >>>>>>>> $ git am *.patch > > >>>>>>>> GWater > > >>>>>>>> Vinicio schrieb: > >>>>>>>>> OK, I do everything from the begin > >>>>>>>>> But I wasn't lucky :) > >>>>>>>>> ------------------------------------------------- > > >>>>>>>>> [EMAIL PROTECTED] ~]$ rm -rf microdia/ > > >>>>>>>>> [EMAIL PROTECTED] ~]$ git clone > >>>>>>>>>http://repo.or.cz/r/microdia.gitInitialized > >>>>>>>>> empty Git repository in /home/vinicio/microdia/.git/ > >>>>>>>>> Getting alternates list forhttp://repo.or.cz/r/microdia.git > >>>>>>>>> Getting pack list forhttp://repo.or.cz/r/microdia.git > >>>>>>>>> Getting index for pack cd343428e98ed39f9eb351986214dff40b7a6f59 > >>>>>>>>> Getting pack cd343428e98ed39f9eb351986214dff40b7a6f59 > >>>>>>>>> which contains 97e893a2f4e33aaf823f3b9d9c4a0a8dd589b69e > >>>>>>>>> ... > >>>>>>>>> walk 3e23a7742154ce45f339a3d8c4a1c0111b0200f3 > >>>>>>>>> walk 025d09e98b8ce68d3627c8cef8964c19996e514e > > >>>>>>>>> [EMAIL PROTECTED] ~]$ cd microdia/ > > >>>>>>>>> [EMAIL PROTECTED] microdia]$ git checkout --track -b development > >>>>>>>>> origin/development > >>>>>>>>> Branch development set up to track remote branch > >>>>>>>>> refs/remotes/origin/ > >>>>>>>>> development. > >>>>>>>>> Switched to a new branch "development > > >>>>>>>>> #I have copied before the patch file > >>>>>>>>> [EMAIL PROTECTED] microdia]$ ls *patch > >>>>>>>>> 0001-Add-sensor-MT9V112-used-in-6270-devices.patch > > >>>>>>>>> [EMAIL PROTECTED] microdia]$ make > >>>>>>>>> make -C /lib/modules/2.6.26.6-79.fc9.i686/build > >>>>>>>>> SUBDIRS=/home/vinicio/ > >>>>>>>>> microdia modules > >>>>>>>>> make[1]: Entering directory `/usr/src/kernels/2.6.26.6-79.fc9.i686' > >>>>>>>>> CC [M] /home/vinicio/microdia/microdia-usb.o > >>>>>>>>> CC [M] /home/vinicio/microdia/microdia-v4l.o > >>>>>>>>> CC [M] /home/vinicio/microdia/microdia-sysfs.o > >>>>>>>>> CC [M] /home/vinicio/microdia/microdia-dev.o > >>>>>>>>> CC [M] /home/vinicio/microdia/microdia-queue.o > >>>>>>>>> CC [M] /home/vinicio/microdia/sn9c20x.o > >>>>>>>>> CC [M] /home/vinicio/microdia/omnivision.o > >>>>>>>>> CC [M] /home/vinicio/microdia/micron.o > >>>>>>>>> CC [M] /home/vinicio/microdia/microdia-debugfs.o > >>>>>>>>> LD [M] /home/vinicio/microdia/microdia.o > >>>>>>>>> Building modules, stage 2. > >>>>>>>>> MODPOST 1 modules > >>>>>>>>> CC /home/vinicio/microdia/microdia.mod.o > >>>>>>>>> LD [M] /home/vinicio/microdia/microdia.ko > >>>>>>>>> make[1]: Leaving directory `/usr/src/kernels/2.6.26.6-79.fc9.i686' > > >>>>>>>>> [EMAIL PROTECTED] microdia]# modprobe videodev > >>>>>>>>> [EMAIL PROTECTED] microdia]# modprobe compat-ioctl32 > >>>>>>>>> [EMAIL PROTECTED] microdia]# insmod microdia.ko > > >>>>>>>>> [EMAIL PROTECTED] ~]$ mplayer tv:// -tv > >>>>>>>>> driver=v4l2:width=640:height=480:fps=25:device=/dev/video0 -vo x11 > >>>>>>>>> MPlayer dev-SVN-r27514-4.3.0 (C) 2000-2008 MPlayer Team > >>>>>>>>> CPU: Genuine Intel(R) CPU T1300 @ 1.66GHz (Family: 6, > >>>>>>>>> Model: 14, Stepping: 8) > >>>>>>>>> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 > >>>>>>>>> Compiled with runtime CPU detection. > >>>>>>>>> mplayer: could not connect to socket > >>>>>>>>> mplayer: No such file or directory > >>>>>>>>> Failed to open LIRC support. You will not be able to use your > >>>>>>>>> remote > >>>>>>>>> control. > > >>>>>>>>> Playing tv://. > >>>>>>>>> TV file format detected. > >>>>>>>>> Selected driver: v4l2 > >>>>>>>>> name: Video 4 Linux 2 input > >>>>>>>>> author: Martin Olschewski <[EMAIL PROTECTED]> > >>>>>>>>> comment: first try, more to come ;-) > >>>>>>>>> v4l2: unable to open '/dev/video0': No such file or directory > >>>>>>>>> v4l2: ioctl set mute failed: Bad file descriptor > >>>>>>>>> v4l2: 0 frames successfully processed, 0 frames dropped. > > >>>>>>>>> On Nov 14, 7:20 pm, GWater <[EMAIL PROTECTED]> wrote: > >>>>>>>>>> Here's your patch. > > >>>>>>>>>> Apply it with > >>>>>>>>>> $ git am <patchfile> > > >>>>>>>>>> Then rebuild and insmod the new module. Good luck. > > >>>>>>>>>> GWater > > >>>>>>>>>> Vinicio Nocciolini schrieb: > > >>>>>>>>>>> OK, I have done a log file on Windows > >>>>>>>>>>> Check if if right for you or I have done some mistakes > >>>>>>>>>>> Vinicio > >>>>>>>>>>>> That's great. > >>>>>>>>>>>> If I need more logs I will ask - until them I'll use the log > >>>>>>>>>>>> someone > >>>>>>>>>>>> else posted some time ago. > >>>>>>>>>>>> I'll tell you when we can start testing :) . > >>>>>>>>>>>> GWater > >>>>>>>>>>>> Vinicio Nocciolini schrieb: > >>>>>>>>>>>>> GWater wrote: > >>>>>>>>>>>>>> OK, > >>>>>>>>>>>>>> now here's my final diagnosis: > >>>>>>>>>>>>>> You're webcam uses a micron MT9V112 sensor. We don't > >>>>>>>>>>>>>> support these > >>>>>>>>>>>>>> sensors (yet!). Maybe I'll take a look at it this weekend - > >>>>>>>>>>>>>> but if > >>>>>>>>>>>>>> there isn't a log from the windows driver yet I'll need > >>>>>>>>>>>>>> some help > >>>>>>>>>>>>>> from you. > >>>>>>>>>>>>>> Do you have a windows box with USb 2.0 where you can > >>>>>>>>>>>>>> install the > >>>>>>>>>>>>>> webcam and record a log of the windows drivers actions? > >>>>>>>>>>>>>> GWater > >>>>>>>>>>>>> Hi again > >>>>>>>>>>>>> I have a laptop Compaq nx6310 with a dual boot: Windows XP > >>>>>>>>>>>>> and Fedora 9 > >>>>>>>>>>>>> In Windows my WebCam work properly > >>>>>>>>>>>>> But I don't kow how can I capture in Windows log action of > >>>>>>>>>>>>> my webcam :( > >>>>>>>>>>>>> Maybe SniffUSB 1.8 can help me? > >>>>>>>>>>>>> ------------------------------------------------------------------------ > > >>>>>>>>>>>>> ------------------------------------------------------------------------ > > >>>>>>>>>>>>> ------------------------------------------------------------------------ > > >>>>>>>>>> [0001-Add-sensor-MT9V112-used-in-6270-devices.patch4K ]From > >>>>>>>>>> 4fdf333ff24c0744614182fc9834d6540caecc19 Mon Sep 17 00:00:00 2001 > >>>>>>>>>> From: GWater <[EMAIL PROTECTED]> > >>>>>>>>>> Date: Fri, 14 Nov 2008 19:14:27 +0100 > >>>>>>>>>> Subject: [PATCH] Add sensor MT9V112 used in 6270 devices > > >>>>>>>>>> This is just basic support - no colorspace switching > >>>>>>>>>> or other special stuff included. > > >>>>>>>>>> Signed-off-by: GWater <[EMAIL PROTECTED]> > >>>>>>>>>> --- > >>>>>>>>>> microdia-dev.c | 6 ++++ > >>>>>>>>>> microdia.h | 1 + > >>>>>>>>>> micron.c | 83 > >>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >>>>>>>>>> micron.h | 2 + > >>>>>>>>>> 4 files changed, 92 insertions(+), 0 deletions(-) > > >>>>>>>>>> diff --git a/microdia-dev.c b/microdia-dev.c > >>>>>>>>>> index f3cdf4d..a233ab9 100644 > >>>>>>>>>> --- a/microdia-dev.c > >>>>>>>>>> +++ b/microdia-dev.c > >>>>>>>>>> @@ -88,6 +88,12 @@ struct sensor_info sensors[] = { > >>>>>>>>>> .address = 0x5d, > >>>>>>>>>> .probe = mt9m001_probe > >>>>>>>>>> }, > >>>>>>>>>> + { > >>>>>>>>>> + .id = MT9V112_SENSOR, > >>>>>>>>>> + .name = "MT9V112", > >>>>>>>>>> + .address = 0x5d, > >>>>>>>>>> + .probe = mt9v112_probe > >>>>>>>>>> + }, > >>>>>>>>>> }; > > >>>>>>>>>> /** > >>>>>>>>>> diff --git a/microdia.h b/microdia.h > >>>>>>>>>> index b3ad414..bdf9610 100644 > >>>>>>>>>> --- a/microdia.h > >>>>>>>>>> +++ b/microdia.h > >>>>>>>>>> @@ -310,6 +310,7 @@ enum microdia_sensors { > >>>>>>>>>> MT9V111_SENSOR = 7, > >>>>>>>>>> MT9V011_SENSOR = 8, > >>>>>>>>>> MT9M001_SENSOR = 9, > >>>>>>>>>> + MT9V112_SENSOR = 10, > >>>>>>>>>> }; > > >>>>>>>>>> diff --git a/micron.c b/micron.c > >>>>>>>>>> index cc70fec..dd4c50b 100644 > >>>>>>>>>> --- a/micron.c > >>>>>>>>>> +++ b/micron.c > >>>>>>>>>> @@ -419,6 +419,89 @@ static __u8 mt9m001_init[][3] = { > >>>>>>>>>> {0x2e, 0x00, 0x24}, {0x07, 0x00, 0x02}, > >>>>>>>>>> }; > > >>>>>>>>>> +static __u8 mt9v112_init[][3] = { > >>>>>>>>>> + {0x0d, 0x00, 0x21}, {0x0d, 0x00, 0x20}, {0xf0, 0x00, > >>>>>>>>>> 0x00}, > >>>>>>>>>> + {0x34, 0xc0, 0x19}, {0x0a, 0x00, 0x11}, {0x0b, 0x00, > >>>>>>>>>> 0x0b}, > >>>>>>>>>> + {0x20, 0x07, 0x03}, {0x35, 0x20, 0x22}, {0xf0, 0x00, > >>>>>>>>>> 0x01}, > >>>>>>>>>> + {0x05, 0x00, 0x00}, {0x06, 0x34, 0x0c}, {0x3b, 0x04, > >>>>>>>>>> 0x2a}, > >>>>>>>>>> + {0x3c, 0x04, 0x00}, {0xf0, 0x00, 0x02}, {0x2e, 0x0c, > >>>>>>>>>> 0x58}, > > ... > > read more » > > signature.asc > < 1KViewDownload --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
