Hi Dave try $ git checkout --track -b kipr origin/kipr instead
-JoJo On Sat, Nov 22, 2008 at 9:55 AM, Dr. SuSE <[EMAIL PROTECTED]> wrote: > Thank you for the help... this did get the driver to load and for > applications to see the camera. However, I am afraid the picture wasn't > much... see attached screenshot. Is this simply the state of support for > this camera right now? > > Thanks again. > > --Dave > > On Fri, Nov 21, 2008 at 9:12 AM, GWater <[EMAIL PROTECTED]> wrote: >> >> Please >> >> get a recent snapshot by following this guide: >> http://groups.google.com/group/microdia/web/testing-microdia-driver-draft >> (Only do Number 1, 2 and 3.) >> >> Then enter microdia directory and execute >> $ git checkout --track -b development origin/development >> >> Then do: >> $ make >> $ sudo insmod microdia.ko >> >> Then install libv4l as described in the README. >> >> Then test it all as described in the README. >> >> GWater >> >> >> >> Dave schrieb: >>> >>> Hi there! I recently purchased a Hue HD Webcam, which is apparently a >>> "Microdia 0c45:6282". I loaded the driver from the openSuSE 10.3 repo >>> (ver. git20080610_2.6.22.19_0.1-9.5) and it reports the following: >>> >>> Nov 21 01:27:33 liquidxs kernel: usb 2-4: new high speed USB device >>> using ehci_hcd and address 7 >>> Nov 21 01:27:34 liquidxs kernel: usb 2-4: new device found, >>> idVendor=0c45, idProduct=6282 >>> Nov 21 01:27:34 liquidxs kernel: usb 2-4: new device strings: Mfr=0, >>> Product=1, SerialNumber=0 >>> Nov 21 01:27:34 liquidxs kernel: usb 2-4: Product: USB20 Camera >>> Nov 21 01:27:34 liquidxs kernel: usb 2-4: configuration #1 chosen from >>> 1 choice >>> Nov 21 01:27:34 liquidxs kernel: microdia: Microdia USB2.0 Webcam - >>> Product ID 6282. >>> Nov 21 01:27:34 liquidxs kernel: microdia: This device is not >>> supported yet. Please contact [EMAIL PROTECTED] if you want add >>> support for this device >>> >>> ...and then the device does not work, of course. So, as instructed >>> above, I am emailing my request for this device to be supported. >>> Please let me know what other information I can provide or what I can >>> do to help. Thank you very much for your time/effort. >>> >>> --Dave >>> >>> >> > > > > > --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
