Paweł Jabłoński schrieb:
Hello!My distro is OpenSuse 11 with updated kernel 2.6.25.20-11-default I have bought webcam with SN9C201 chip (http://www.excline.com/download/software/45-Acies.html), so after a few minutes with google I installed microdia opensuse drivers, it didn't work with messages below. I download source rpm and recompiled it with my current kernel. It didn't help :-(. dmesg info: usb 2-6: new high speed USB device using ehci_hcd and address 16 usb 2-6: configuration #1 chosen from 1 choice microdia: Microdia USB 2.0 Webcam - 0C45:627C plugged-in. microdia: Detected SN9C20X Bridge microdia: Could not assign sensor: Please report to [email protected] . microdia: Device Init failed (-22)! usb_microdia_driver: probe of 2-6:1.0 failed with error -22 usb 2-6: New USB device found, idVendor=0c45, idProduct=627c usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 2-6: Product: USB20 Camera According to windows inf file: %USBPCamDesc% = SN.USBPCam,USB\VID_0c45&PID_627c ; SN9C201 + HV7131R I have sensor HV7131R Can you help me run this webcam? -- Best regards Pawel
Thanks for your report. This is the situation:Up until now no one has reported your webcam (0c45:627c). Therefore the driver does not yet support it. However: If you provide us with logs of your webcams windows driver as described here:
http://groups.google.com/group/microdia/web/usb-sniffing-on-windows we should be able to add support for your webcam pretty fast. If you have any further questions, please ask. GWater
signature.asc
Description: OpenPGP digital signature
