Thanks Vasily, it still don't work for me on the NSLU with ARM Processor, I think i change to a network cam.
On Jan 12, 8:37 am, Vasily Khoruzhick <[email protected]> wrote: > On 11 January 2009 17:42:35 Cerus wrote: > > > > > Hi, > > > i need help with a new Hama PC-Webcam AC-150. > > > dmesg: > > > New USB device found, idVendor=0c45, idProduct=6142 > > New USB device strings: Mfr=0, Product=1, SerialNumber=0 > > Product: USB camera > > > lsusb: > > > ID 0c45:6142 Microdia > > > I use Nslu with Debian Kernel 2.6.26-1-ixp4xx > > > I found > >http://groups.google.com/group/microdia/web/testing-microdia-driver-d... > > > and compiled it sucessfully. > > > [43593168.980000] usbcore: registered new interface driver sn9c20x > > [43593168.990000] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 > > loaded > > [43593181.290000] usb 3-1: USB disconnect, address 7 > > [43593184.040000] usb 3-1: new full speed USB device using ohci_hcd > > and address 8 > > [43593184.230000] usb 3-1: configuration #1 chosen from 1 choice > > [43593184.240000] usb 3-1: New USB device found, idVendor=0c45, > > idProduct=6142 > > [43593184.250000] usb 3-1: New USB device strings: Mfr=0, Product=1, > > SerialNumber=0 > > [43593184.260000] usb 3-1: Product: USB camera > > > But it still don't work, i think ID 6142 is not known. What can I do ? > > > Thanks > > > Dietmar > > Hi, your cam is not sn9c20x-based (it's sn9c1xx-based), so sn9c20x driver > doesn't support it. > > Regards > Vasily > > signature.asc > < 1KViewDownload --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
