Hello, I have a problem: my webcam doesn't work. When I type 'dmesg' I get lots of stuff ending with:
[ 1957.212652] usb 1-1: not running at top speed; connect to a high speed hub [ 1957.243521] usb 1-1: configuration #1 chosen from 1 choice [ 1957.252760] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6240 plugged-in. [ 1957.256633] sn9c20x: Write register failed index = 0x1000 [ 1957.256645] sn9c20x: Bridge Init Error (-84). line 0 [ 1957.256650] sn9c20x: Device Init failed (-84)! [ 1957.256666] sn9c20x: probe of 1-1:1.0 failed with error -84 [ 1960.452761] sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded [ 1960.453405] usbcore: deregistering interface driver sn9c20x [ 1960.913896] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6240 plugged-in. [ 1960.940578] sn9c20x: No ack from I2C slave 0x5d for write to address 0x07 [ 1960.940595] sn9c20x: Detected MT9M001 Sensor. [ 1960.941521] sn9c20x: Webcam device 0C45:6240 is now controlling video device /dev/video0 [ 1960.969167] sn9c20x: Using yuv420 output format [ 1960.969241] usbcore: registered new interface driver sn9c20x [ 1960.969251] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded vince...@vinicio:~/microdia$ I've looked around the discussions but I can't work out where to go from here--I'd appreciate any advice. Thanks! --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
