Rick Miles schrieb:
I've posted under a new subject as the message has changed. I have libv4l and the newly compiled module installed and here is dmesg output.usb 1-10: new high speed USB device using ehci_hcd and address 2 usb 1-10: configuration #1 chosen from 1 choice usb 1-10: New USB device found, idVendor=0c45, idProduct=6242 usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-10: Product: USB20 Camera sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6242 plugged-in. sn9c20x: Detected MT9M111 Sensor. sn9c20x: Webcam device 0C45:6242 is now controlling video device /dev/video1 sn9c20x: Using yuv420 output format usbcore: registered new interface driver sn9c20x sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded microdia: Microdia USB 2.0 webcam driver loaded usbcore: registered new interface driver usb_microdia_driver microdia: v2008.10 : Microdia USB 2.0 Webcam DriverThe microdia module used to work well enough for my daughter but this module brings no joy. Xcam just shows black an grey horizontal bars. Mplayer and amsn config ap have colour but everything looks like an amoeba or something. I've attached two pics.Any suggestions? I don't code but I can test. I'm running slackware-12.2 and kernel is a stock 2.6.27.7-smp.
Your dmesg output show messages from microdia.ko _and_ sn9c20x.ko . I'm afraid they may be conflicting. If you installed microdia.ko permanently you need to remove it before loading or installing sn9c20x.ko .
GWater
signature.asc
Description: OpenPGP digital signature
