Hi, Just noticed that's the same camera as mine. With me lsusb reports:
Bus 005 Device 003: ID 0c45:6270 Microdia U-CAM PC Camera NE878 And dmesg reports [ 423.192067] usb 5-1: new high speed USB device using ehci_hcd and address 3 [ 423.328228] usb 5-1: configuration #1 chosen from 1 choice [ 423.463109] Linux video capture interface: v2.00 [ 423.504410] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6270 plugged-in. [ 423.611245] sn9c20x: Detected MT9V011 Sensor. [ 423.611409] sn9c20x: Webcam device 0C45:6270 is now controlling video device /dev/video0 [ 423.622987] sn9c20x: Using yuv420 output format [ 423.623037] usbcore: registered new interface driver sn9c20x [ 423.623044] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded So it's likely a MT9V011 sensor My cam is by CANYON On my laptop it installs cleanly - if there is something to test or other way to help, I'm willing. Regards Stefan 2009/3/9 JoJo jojo <[email protected]> > > Hi Mateusz > > sn9c20x: Unsupported sensor. > > Which sensor do you have ? > To find out how, follow this guide > > https://groups.google.com/group/microdia/web/howto-get-information-on-your-webcam > > -JoJo > > 2009/3/10 emeliot <[email protected]>: > > > > Hello > > > > My cam is: > > > > Bus 004 Device 002: ID 0c45:6270 Microdia U-CAM PC Camera NE878 > > > > I trying to install this camera many a times in last 2 month. Every > > time i have the same errors on the others distributions of linux. No > > I'm in the Arch linux but I can't use the installation in pacman > > because of blocking through my deliverer (holly Neostrada ;/ in > > Poland) some page for example http://repo.or.cz/w/microdia.git . > > I find in this group drivers for my model I think: > > > > microdia-d71c8ae7eaa7cf5811a76c07c8bb46d872567a67.tar.gz > > > > Have I'm right ?? > > > > So I go with installation instructions and every thing fine > > > > bash-3.2# make > > make -C /lib/modules/2.6.28-ARCH/build SUBDIRS=/home/mateusz/Desktop/ > > microdia modules > > make[1]: Wejście do katalogu `/usr/src/linux-2.6.28-ARCH' > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-usb.o > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-v4l2.o > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-sysfs.o > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-dev.o > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-queue.o > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-bridge.o > > CC [M] /home/mateusz/Desktop/microdia/omnivision.o > > CC [M] /home/mateusz/Desktop/microdia/micron.o > > CC [M] /home/mateusz/Desktop/microdia/hv7131r.o > > CC [M] /home/mateusz/Desktop/microdia/sn9c20x-debugfs.o > > LD [M] /home/mateusz/Desktop/microdia/sn9c20x.o > > Building modules, stage 2. > > MODPOST 1 modules > > CC /home/mateusz/Desktop/microdia/sn9c20x.mod.o > > LD [M] /home/mateusz/Desktop/microdia/sn9c20x.ko > > make[1]: Opuszczenie katalogu `/usr/src/linux-2.6.28-ARCH' > > > > until I try install module I get : > > > > insmod: error inserting 'sn9c20x.ko': -1 Unknown symbol in module > > > > so fallow the instruction: > > > > bash-3.2# modprobe videodev > > bash-3.2# modprobe compat-ioctl32 > > > > and then module install fine apparently... > > > > dmesg gives: > > > > sn9c20x: Unsupported sensor. > > sn9c20x: probe of 4-1:1.0 failed with error -22 > > usbcore: registered new interface driver sn9c20x > > sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded > > sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded > > usbcore: deregistering interface driver sn9c20x > > sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6270 plugged-in. > > sn9c20x: I2C slave 0x5d returned error during write to address 0xff > > sn9c20x: I2C slave 0x5c returned error during write to address 0x01 > > sn9c20x: I2C slave 0x5d returned error during write to address 0xf0 > > sn9c20x: Unsupported sensor. > > sn9c20x: probe of 4-1:1.0 failed with error -22 > > usbcore: registered new interface driver sn9c20x > > sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded > > > > When I trying to open mplayer: > > > > ERROR: ld.so: object '/usr/lib/libv4l/v4l2convert.so' from LD_PRELOAD > > cannot be preloaded: ignored. > > MPlayer dev-SVN-rUNKNOWN-4.3.2 (C) 2000-2009 MPlayer Team > > CPU: AMD Athlon(tm) Processor (Family: 6, Model: 10, Stepping: 0) > > CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 > > Compiled with runtime CPU detection. > > 137 audio & 292 video codecs > > > > Playing tv://. > > TV file format detected. > > Selected driver: v4l2 > > name: Video 4 Linux 2 input > > author: Martin Olschewski <[email protected]> > > comment: first try, more to come ;-) > > v4l2: unable to open '/dev/video0': No such file or directory > > v4l2: ioctl set mute failed: Bad file descriptor > > v4l2: 0 frames successfully processed, 0 frames dropped. > > > > I don't have a video0 why ?? > > > > What I should do ;/ what's the problem ?? please give mi solution... > > > > Greetings Mateusz > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
