Ilya, I know from other reports that the 6270 does in fact work with the gspca driver, however that is also the camera that has three different sensors it can use as well so you probably are using a different sensor on your camera. I'm guessing its probably the mt9v112 but if you can email me and let me know which sensor you are using i'll see if i can figure out what the problem is. The sensor that is being detected shoudl be listed in dmesg after you plug in your camera.
Regards, Brian Johnson On Wed, Apr 7, 2010 at 5:46 AM, Ilya <[email protected]> wrote: > the gspca driver from kernel source doesn't work for me (USB > 0c45:6270). At 680:480 resolution the image decompression breaks, at > smaller resolutions I get broken image, usually with proper picture > filling top left quarter. The driver built from git works finely. > > -- > Lets make microdia webcams plug'n play, (currently plug'n pray) > To post to this group, send email to [email protected] > Visit us online https://groups.google.com/group/microdia > > To unsubscribe, reply using "remove me" as the subject. > -- Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia
