On Wed, 2008-01-16 at 22:45 -0500, Amy Bensinger (Contractor) wrote: > Hi, Adam. > > I would say option 1 is the least desirable from an operational > perspective, as MFI's are more likely to want the Approval to be > required than not, hence the client should immediately enter the pending > approval state.
Thank you, Amy. There's actually a fourth option I forgot to mention that is also somewhat workable, at least for new Mifos installations: 4. leave the flag off in the database and on in the config file. Flag will be turned on during the first start-up after the logic is in place. Only way to turn the flag off is to, before first start-up, change the flag in the config file. I just want to underline the fact that only options 1 and 4 actually provide configurablility of the "pending approval state enabled for clients" flag (even if the only possible customization for this flag is from off to on). Thoughts? -- Adam Monsen ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Mifos-functional mailing list Mifos-functional@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mifos-functional
