Hello Ajani,
My apologies,I did not realize that your issue was regarding MifosX.
I thought they were for mifos.
Kindly ignore my previous mail.
Anyways,
To reset your password
1) Access your server using putty.
2) Log in to MySQL using the following command.
*
mysql -u root -pmysql*
3) Run the following commands after logging in to mysql.
*use `mifostenant-default`
update m_appuser set username
='mifos',password='5787039480429368bf94732aacc771cd0a3ea02bcf504ffe1185ab94213bc63a',
nonlocked=1,enabled=1,nonexpired=1 where id=1;
*
This will reset your username to 'mifos' and password to 'password'
Regards,
Sughosh
On Mon, Jun 24, 2013 at 10:13 AM, Sughosh Bharadwaj <
[email protected]> wrote:
> Hello Ajani,
>
> Please follow the below steps to reset the password.
>
> 1) Access your server through putty
>
> 2) Use the following command to log in to mysql
>
> *mysql -u root -ppassword *
>
> Or,
>
> If you have changed the credentials for mysql,then run the following
> command.
>
> *mysql -u [your username] -p[your password]*
>
> 3) Now run the following command to select mifos database.
>
> *use mifos*
>
> 4) Now run the following command to reset your password.
>
> *update personnel set
> login_name="mifos",password=0x22648ca42330a561964dbe32f54e6a04a49d03f203ca64b2515338d9,locked=0
> where personnel_id=1;
>
> *
> * *This will reset your password to "testmifos" and username to "mifos".
>
> Regards,
> Sughosh
>
>
>
>
> On Mon, Jun 24, 2013 at 4:57 AM, Amos Ajani <[email protected]
> > wrote:
>
>> Leaders,****
>>
>> Can someone help on how to reset the Admin password on the Mifos in cloud.
>> ****
>>
>> ** **
>>
>> The original is UserID = Mifos, and the Password is Password, but we have
>> changed the default password and now, we are locked out and need to reset
>> it.****
>>
>> ** **
>>
>> Thanks,****
>>
>> Amos****
>>
>> ** **
>>
>> ** **
>>
>> Amos Ajani, ****
>>
>> CISA, CISM, BS7799-2; ISO/IEC 27001 Auditor****
>>
>> ****
>>
>> Tel: +1-248-875-3409****
>>
>> eFax: +1-209-433-2504****
>>
>> www.ladlasprince.com****
>>
>> ** **
>>
>> *CONFIDENTIALITY NOTICE:* This electronic mail transmission and any
>> documents accompanying this electronic mail transmission is intended by
>> Ladlas Prince / the sender for the use of the named addresses(s) to which
>> it is directed and may contain information that is privileged, or otherwise
>> confidential. It is not intended for transmission to, or receipt by,
>> anyone other than the named addressee(s) (or a person authorized to deliver
>> it to the named addressee(s)). It should not be copied or forwarded to any
>> unauthorized persons. If you have received this electronic mail
>> transmission in error, please delete it from your system without copying or
>> forwarding it, and notify the sender of the error by replying the e-mail or
>> by calling Ladlas Prince / sender at (888) 586-5267, so our address
>> record can be corrected.****
>>
>> ** **
>>
>> *From:* Edward Cable [mailto:[email protected]]
>> *Sent:* Tuesday, June 11, 2013 1:39 PM
>> *To:* Micro Finance
>> *Cc:* Sughosh Bharadwaj; Vishwas Babu; Amos Ajani; mifos-users
>> *Subject:* Re: EC2 Setup Questions****
>>
>> ** **
>>
>> Dayna,****
>>
>> ** **
>>
>> My apologies as I thought you had sent this to the mifos-users mailing
>> list. You should send all question like this there. I've included some
>> replies but have also cc'd the list.****
>>
>> ** **
>>
>> Ed****
>>
>> ** **
>>
>> On Mon, Jun 10, 2013 at 8:17 AM, Micro Finance <[email protected]> wrote:
>> ****
>>
>> Hello All - ****
>>
>> ** **
>>
>> I am progressing well with the EC2 setup for Sal Fol Microfinance Bank.
>> I do have a few questions:****
>>
>> ** **
>>
>> I am AMI-f342369a, running on instance i-cf131daf****
>>
>> ** **
>>
>> Questions:****
>>
>> - How do I view a full chart of accounts? There are more accounts in
>> this set up than are listed in the default COA instructions.****
>>
>> Are you wanting to remove account heads? You can do so in Admin >>
>> Manage Chart of Accounts. The default COA is simply a starting point from
>> which you can add or modify additional accounts according to your
>> organization's chart of accounts.****
>>
>>
>> - How do I change the currency to Naira from Rupes??****
>>
>> The currency configurations settings are located in the application
>> configuration .properties file. There are two values you can modify.****
>>
>> ** **
>>
>>
>> http://mifos.org/documentation/configuration#customizing-the-application-configuration-file
>> ****
>>
>> ** **
>> Currency****
>>
>> The currency that Mifos uses.****
>>
>> This setting causes Mifos to use currency set internally, in its
>> calculations and database. Externally, you will see no effect. The user
>> interface does not display currency symbols ($, £, etc.). This is a known
>> issue <http://thread.gmane.org/gmane.comp.finance.mifos.devel/5457>.
>> This sets the default currency in Mifos. All accounting rules without a
>> currency code on the property applies to the default currency.****
>>
>> *Property name*: AccountingRules.CurrencyCode****
>>
>> *Mutability*:
>> TRAPDOOR<http://mifos.org/documentation/configuration#about-the-one-time-settings>
>> ****
>>
>> *Options*: 3 letter Alphabetical codes from this list - `ISO 4217
>> currency codes <http://www.iso.org/iso/support/currency_codes_list-1.htm
>> >`_****
>>
>> *Default*: INR****
>>
>> *Example*: AccountingRules.CurrencyCode=INR causes Mifos to use the
>> Indian rupee as the currency.****
>>
>> If you want to use an additional currency for loan products, the setting
>> is used to set an additional currency code. Use the currency code to set
>> specific rounding rules below for that currency.****
>>
>> *Property name*: AccountingRules.AdditionalCurrencyCodes****
>>
>> *Mutability*: TRAPDOOR <http://mifos.org/#about-the-one-time-settings>***
>> *
>>
>> *Options*: any currency code****
>>
>> *Default*: none****
>>
>> ** **
>>
>> I need to verify however that currency isn't only a one-time setting that
>> you have to configure on initial install.****
>>
>> ** **
>>
>> Natalia - could you please verify whether or not currency is a TRAPDOOR
>> one-time setting? ****
>>
>>
>> - When creating a new loan, the loan products do not appear in the
>> drop down, therefore, I cannot create a loan. How do I correct this?**
>> **
>>
>> This is likely tied to whether or not you've made them applicable to
>> groups or clients. Are you certain that the loan product you've created is
>> available for clients or groups?****
>>
>> ** **
>>
>> Ed ****
>>
>> ** **
>>
>> ** **
>>
>> Thank you for your kind assistance.****
>>
>> ** **
>>
>> Dayna B. Harp, President****
>>
>> ** **
>>
>> *Harp MFB Advisors*****
>>
>> *Assisting Micro Finance*****
>>
>> 3140 Fishinger Road****
>>
>> Columbus, OH 43221 USA****
>>
>> +1 614.588.6845****
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>>
>>
>> ****
>>
>> ** **
>>
>> --
>> *Ed Cable*****
>>
>> Mifos Community Manager****
>>
>> Director of Community Programs, The Community for Open Source Microfinance
>> ****
>>
>> [email protected] | Skype: edcable | Mobile: 484.477.8649****
>>
>> ** **
>>
>> *Collectively Creating a World of 3 Billion Maries | *http://openmf.org *
>> * <http://on.fb.me/cosm-openmf>* *** <http://www.twitter.com/mifos>****
>>
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Mifos-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mifos-users
