Did that allready with no success...but what i could after that . was using
netinstall and upgradet the firmware and now i have access again
Sent with AquaMail for Android
http://www.aqua-mail.com
On July 21, 2016 08:24:35 Scott Reed <[email protected]> wrote:
Right, the general process is:
unplug power
depress button
power on
wait for ACT light (or equivalent) to flash (about 10 seconds
Release button
Allow time for unit to boot
This goes back to factory default, so if the default has firewall rules,
you must use the proper port.
On 7/21/2016 4:47 AM, Grand Avenue Broadband wrote:
Still waiting for them to show up at US dealers, have had several on
order for some time now. :-(
Hopefully, you already realize that the reset button is effective only
at power-on time.
On Jul 20, 2016, at 7:57 PM, Daniel Biland <[email protected]
<mailto:[email protected]>> wrote:
does anybody use the rblhg-5nd ?
i have 2 units i cant reset, i press the reset button for allmost 5
minutes and nothing happends,
also i cant login by winbox, neither putty... what else should i trY ?
they actually where working fine on a 23 km long link, but suddenly i
cant configurate anything anymore
*
*
--
Daniel Biland
Cel.+52(1)287-8890600 Office:+522878755192
www.tuxcom.net.mx Skype: danielbiland
_______________________________________________
Mikrotik-users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
--
Grand Avenue Broadband -- Wireless Internet Service
Circle City to Wickenburg and surrounding areas
http://grandavebb.com
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
----------
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
