Yes, I did read that, and that is the current setting. There is no way
AFAIK to change settings on the other end (FiberPOE)
On 9/12/2016 8:48 PM, Alexander Neilson via Mikrotik-users wrote:
Have you set the port to 1000Mbps FD manually (no auto neg)?
Mikrotik have said in a number of places that you may need to set both
ends manually to get link passing (I have often seen happy lights as
soon as it detects some optic power)
Regards
Alexander
On 13/09/2016, at 12:34, Jeff Evans via Mikrotik-users
<[email protected] <mailto:[email protected]>> wrote:
I have an RB2011UiAS that I want to use for a customers home router, we
have an 800 foot fiber run to a ubnt FiberPOE. Any modules I've tried
only show Tx on the Interface, I have also tried the modules on a
Netonix switch (replacing the FiberPoe) with the same result.
The fiber modules that I have tried : Mikrotik S35LC20D/S53LC20D pair --
MAXXwave MW-1315-SM-US/MW-1513-SM-US pair
the above both give me the blue light of success on the
FiberPOE but no real joy.
AND a set of Maxxwave MW-LX-SM-US -- dual fiber, no light on the
FiberPOE with this.
any ideas? Thanks!
Jeff Evans, Managing Member
PennWisp, LLC
www.pennwisp.com <http://www.pennwisp.com>
_______________________________________________
Mikrotik-users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
--
Jeff Evans, Managing Member
PennWisp, LLC
www.pennwisp.com
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
