Depending on the hardware release and firmware version, you have to run
vlan_add or something like that to allow the VLANs you want to be passed
through the ApexLynx.
-Kristian
On 09/16/2016 09:10 AM, Christian Palecek via Mikrotik-users wrote:
Hello,
I am having an issue that I’m not sure which device is causing.
I have a Trango Apex Lynx that plugs in to a Mikrotik CRS. I setup a
ingress vlan rule that translates this port in to an untagged svlan
port, but when I do this I lose connectivity.
The egress, vlan, and trunks are setup correctly. In fact there are
two PTP 820S that have an identical setup that work fine, and I have
two trango apex’s that need to be on this same vlan but when adding
them to the ingress rule that’s when I lose connectivity.
Any help would be appreciated.
Thanks,
Christian Palecek
Chief Operations Officer
Cybernet1 Inc.
Hamilton, MT
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
