Update firmware to 6.37.1 and then update bios if needed. Check to make sure you're not getting hit with the DNS DDoS attacks by blocking inbound traffic TCP and UDP on port 53 of your external interface.
Judd On Oct 26, 2016 8:46 PM, "TJ Trout via Mikrotik-users" < [email protected]> wrote: > I have a mikrotik CRS which is uplinked with 10G fiber, and then the > copper 1G ports go through a netonix acting as a midspan, occasionally the > CRS is locking up where I can still get into the web interface through the > fiber uplink, but it's not passing passing any data over the copper > ports...other times it will pass some data with 75% packet loss and > 1-10mbps traffic when actual traffic is 750-900mbps > > Trying to figure out if I need to swap it out or update the firmware? > enable / disable STP, FC, etc? > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users > >
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
