Thank you Steve. I'm using two PowerBeam M5 400, bridged, connected at -55 1.2 miles link, Transmit CCQ at 99 to 100%, TX/RX Rate 300Mbps / 300Mbps, airMAX quality and capacity over 85%.
Don't know if that radio is can pass over 100Mbps but, according to the rate is connected I think it should handle at most 115Mbps. On Thu, Nov 24, 2016 at 12:27 PM, Steve Barnes <[email protected]> wrote: > What are you using as the actual radios? How are they configured? Routed, > bridged, wds, ospf, etc. > > > > Steve Barnes > > Wireless Ops Manager > > NLBC.com > > PCSWIN.com > > > > *From:* [email protected] [mailto:mikrotik-users- > [email protected]] *On Behalf Of *OWS Optimum Wireless via Mikrotik-users > *Sent:* Thursday, November 24, 2016 3:29 AM > *To:* Mikrotik Users <[email protected]> > *Subject:* [Mikrotik Users] PCC load balancer with vlan acting weird > > > > Hello. > > > > I'm wondering what is happening to a load balance I'm doing with two lines > coming from a PTP link about 4km away from our station, both lines are > 100Mbps/10Mbps, each on vlan to an incoming interface. > > > > Lately I have noticed that when I enable both lines mangle rules, or lines > (have a netwatch script for failover), the total traffic consumption > doesn't go over 70Mbps but, if I only have one line active it maxes out. > > > > Don't know what and where to look into. The LAN port is Gigabit into a > rb3011. > > > > I'll appreciate if anyone can guide me. > > > > Thanks. >
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
