You can setup an EoIP link and then add it to a bridge, same with VPLS if you go the MPLS/VPLS route (which works great, but requires a lot of planning and careful MTU setting!). So the tunnel is PTP, but bridging through it lets you extend LAN segments wherever you need them.
On Tue, Dec 13, 2016 at 10:22 AM, Ethan E. Dee via Mikrotik-users < [email protected]> wrote: > Yeah, > I'm talking about running broadcast traffic. Not two different subnets. > Isn't EoIP only a PTP. Looking more for a PTMP. > > > On 12/13/2016 11:10 AM, Lewis Bergman wrote: > > We did this with IPSec on MT. The subnets of each location must be > different so the routing policy in the Tik knows what to do with the > packets. If you are talking being able to run broadcast traffic across them > then EoIP is the only answer I know of. > > On Tue, Dec 13, 2016 at 10:00 AM Ethan E. Dee via Mikrotik-users < > [email protected]> wrote: > >> I am kind of new to the idea of have LANs span across WANs. >> A very basic idea I'm trying to accomplish is to have 3 sites that can >> share a L2 network without having to route (as far as the internal >> devices can tell). >> Also I don't own any of the routers in between. Like for example, one >> site is Level3 Fiber, one site is Charter 60x4, one site is 3 meg DSL. >> (don't get hung up on that part) >> What are some good ideas for this. Can't find a similar scenario anywhere. >> Would appreciate any input. >> >> >> -- >> This message has been scanned by E.F.A. Project and is believed to be >> clean. >> >> >> _______________________________________________ >> Mikrotik-users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/mikrotik-users >> > > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users >
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
