You'll need to port forward. /ip firewall nat
chain=dstnat action=dst-nat to-addresses=192.168.1.10 to-ports=999 protocol=tcp dst-address=1.2.3.4 in-interface=ether1-gateway dst-port=80 log=no log-prefix="" So this would port forward http://1.2.3.4:999 to 192.168.1.10 to the web gui on port 80 (the ubnt or whatever ip it is) I wouldn't keep it on though. Just enable that rule as you need it. -- Steven Kenney Network Operations Manager WaveDirect Telecommunications http://www.wavedirect.net (519)737-WAVE (9283) From: "Jan-OOLLC via Mikrotik-users" <[email protected]> To: [email protected] Sent: Thursday, December 7, 2017 9:06:38 AM Subject: [Mikrotik Users] howto get past the mtik router and access the ubnt html gui? Using winbox, is there a way to drill in from internet and access the html gui on a Ubiquiti radio? Presently I'm using the winbox Telnet tool and ssh to get at the system.cfg data on the radios. This is a real PITA, and gives me no means for updating radios and changing settings. Can someone please show this ignoramus how to do the gui from remote? -- J _______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
