Not exact on your config...but you could use the “everything else” flag on the source ip address in the nat rule. If you want to just not allow the specific source ip address to nat out then just place the action to accept and make sure you place the rule itself above your other nat rules.
::://Shawn C. Peppers\\::: > On Feb 15, 2018, at 8:02 AM, Kevin Melson via Mikrotik-users > <[email protected]> wrote: > > We have 1:1 Nat setup. > I know i can create ranges to exclude the ip address i want to but is there a > command I could use to just exclude one IP address. > We are having a weird NAT issue with our aircontrol server and I would just > like to exclude it from the network to do some testing > > Thanks, > > Kevin Melson > Eagle One Wireless\PC Station > 2007 Hwy 72 E > Corinth, MS 38834 > 662-287-1722 > [email protected] > www.e1w.com > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
