I'm not sure if 3.10 doesn't have some serious problems. I just
upgraded a 433 board and keep getting "System rebooted because of kernel
failure". *After looking at the Mikrotik forums it appears to be
happening on many boards. I would personally not recommend it until it
is worked out.
Eric
*
Mark McElvy wrote:
I took a client directly from 2.50 to 3.7 without issue.
-----Original Message-----
From: Aaron, Network Administrator, Great Lakes Internet <[EMAIL PROTECTED]>
Sent: Friday, June 06, 2008 15:29
To: [email protected] <[email protected]>
Subject: [Mikrotik] RouterOS 3.10 upgrade
Hi Everybody:
Does anybody have any experience upgrading RouterOS 2.9.43 directly to
3.10?
I have several units in the field that I would like to upgrade. I would
prefer doing it from the office, but I am concerned that such a big
upgrade will affect the settings on the unit and lock me out. This is
especially a concern as I would be upgrading the unit over a wireless
link.
Also, does anybody have any experience with adjusting the settings in
RouterOS to help mitigate the effects of multipathing? Is there anything
I can do on the AP to help improve reliability in a multipath heavy, low
signal strength environment?
Please let me know if anybody has any information.
---
Aaron, MCP, Network+, A+
Network Administrator
[EMAIL PROTECTED]
Great Lakes Internet, Inc
112 N. Howard
Croswell, MI 48422
(810) 679-3395
MI Toll-Free (877) 558-8324
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.butchevans.com/pipermail/mikrotik/attachments/20080606/8de3d926/attachment.html
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
