Did you have the masquerade rule?
Martín Ruiz
Director técnico
902430367 - 669379521
www.ibersystems.es
Enviado desde mi iPhone
El 24/04/2010, a las 02:52, "Stuart Pierce" <[email protected]>
escribió:
I have had the same problem and can not or could not nail it down, a
cpe would get an ip address from the hotspot dhcp server but would
not bring up the hotspot login page or surf the walled garden ip's.
I did have a firewall rule limiting the number of connections per ip
address and thought maybe that was the problem. One of my towers is
really a bridged client to a tower with a tik box. The client tower
has an ap and all of the cpe's look like they are coming from that
bridged client ( which seems to get an ip nat'd ), so I figure it
was that mac/ip that was causing the problem by having to many
connections associated with it.
---------- Original Message ----------------------------------
From: "Ralph" <[email protected]>
Reply-To: Mikrotik discussions <[email protected]>
Date: Fri, 23 Apr 2010 19:24:30 -0400
No- only the default stuff that the hotspot setup creates.
Only thing we have is some ip binding passthroughs for getting to
some of
the things behind the hotspot portal from outside on the Internet.
We have
these rules at many locations and they haven't been a problem.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Stuart
Pierce
Sent: Friday, April 23, 2010 8:08 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Some hotspot radios behind my MT don't get
outside
access
Do you have any firewall rules limiting the number of connections
from ip
addresses ?
---------- Original Message ----------------------------------
From: "Ralph" <[email protected]>
Reply-To: Mikrotik discussions <[email protected]>
Date: Fri, 23 Apr 2010 18:39:04 -0400
Hi Josh-
1. About once a year, some of the hotspot radios behind this
router begin
doing weird things- like giving users MT IP addresses but not
allowing them
to see the captive portal, or maybe not allowing them to the
Internet. The
radios are a Tropos mesh system and it is properly meshed and
working
correctly. It is like the hotspot is blocking them. As a matter
of fact,
if I put a bypass rule in the hotspot for the user's IP address he
gets to
the Internet just fine. So it really appears like a hotspot
problem and not
a basic problem. Most of the time when this happens, we go spend
half a
day pulling our hair out and then run out of time and rebuild the
router
(default and start over). Today my guys had to leave after 5
hours and I
am
going to have to do this remotely. BTW- it is running 4.6 as of
today. It
was on 4.3 before but was doing the same thing.
2. I am not familiar with that setting. I even searched the web for
Mikrotik +"on default". Can you fill me in?
I stared and compared all the firewall rules between this system
and one
that works and can see no difference.
I'd love to just have Butch or someone take a quick look and see
if they
see
an obvious problem, but it is late on Friday now.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Josh
Luthman
Sent: Friday, April 23, 2010 6:12 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Didn't mean to hijack thread
1) Why do you need to blow it away?
2) You could change the "on default" config.
On 4/23/10, Ralph <[email protected]> wrote:
Sorry- I replied to save typing the address and forgot to change
the
subject.
I have a PC running MT 4.6 that I want to "blow away".
It is 100 miles away.
Normally when I do this, I browse to it on the web, do the reset,
and it
keeps the WAN info so I can get back in to re-do the rest of the
parameters.
However this one has PPPoE instead of a straight Ethernet LAN
connection.
Does anyone know if the PPPoE credentials are retained like the
rest of
the
WAN data when you do this?
Thanks
Ralph
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
--
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
"Success is not final, failure is not fatal: it is the courage to
continue that counts."
--- Winston Churchill
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
________________________________________________________________
Sent via the WebMail system at avolve.net
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
________________________________________________________________
Sent via the WebMail system at avolve.net
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
